Drying Machine Suppier Support OEM&ODM Service

1. Introduction and application:
Round static vacuum dryer is to put raw materials under the state of vacuum for heating and drying.
Suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose and deteriorate under
high temperature in pharmaceutical, chemical, food and electronic industries.
Under the condition of vacuum, the boiling point of the solution materials will decrease and evaporation efficiency will be higher.
It will increase the strength of heat and mass exchange.

2. Features:
(1) The boiling point of raw materials will decrease under the condition of vacuum, and make the heat pushing force of evaporator
becaome greater. Therefore It can save the conducting area of the evaporator for a certain amount of heat radiation.
(2) The heating source for evaporation may be low pressure steam or surplus heat steam (customer may choose water or oil to
heat for special requirement).
(3) Heat loss of evaporator is reduced.
(4) Suitable for drying heat sensitive materials that are easy to dissolve, agglomerate or polymerize or denature.
(5) Treatment of disinfection can be carried out before drying. Then there will be no impurities will be mixed inside the dryer during
the period of drying.
(6) It is a static dryer. No demage to the shape or structure of raw materials.

3. Notice:
(1) Before placing order, please choose suitable vacuum dryer in accordance with the physical property, primary moisture and final
moisture of raw material and factors such as temperature, vacuum level, drying capacity and drying time, etc. Round static vacuum
drying machine has four heating ways, steam, hot water, heat conduction oil and electricity. (2) In order to increase the output of
product, the drying layer can be increased accordingly.
(3) Choose the auxiliary parts of vacuum drying system which is indicated in operation manual and supplied and installed by us.
(4) We can also design, manufacture and install as request for some special requirements.
(5) If use vacuum pump to take out air and humidity, the drying speede will be faster. (6) If use condenser, the solvent in raw material
can be recovered. If the solvent is water, condenser might be canceled and the cost could be saved.

Why choose us?
1. Real Steel Material: we have spectrometer for customer to check the material.
2. High machining accuracy: we use top brand CNC machining center, plasma and laser cuting machines,
etc. to process components.
3. Professional work team: 10 engineers more than 20 year experience in R&D. Some production staff more
than 30 year experience.
4. Standard production rules: we follow 5S industrial management standard to carry out our orders.
5. Strict quality control: we have QC to follow and check each working procedure as per industrial standard.
6. Customer approval: we have served more than 1000 customers in more than 50 countries.
7. Competitive price: German quality with Chinese price.